Documentation requirementsDocumentation requirements
The authorities set requirements that all earthing facilities shall be checked every 10th year. Let us do the documenting for you!
What do the requirements mean in practice?
The requirements are meant to prevent dangerous contact voltages in facilities with earthing faults. To verify that an earthing facility meets the requirements, at least one of the points listed in formal requirements must be met. In high voltage facilities, contact voltage is calculated in relation to Table 4-2 in the guidelines to FEF:2008, 1 pole ground fault current and transition resistance. We at Trainor Kontroll og måling AS can help you measure and document this.
We measure and document
We calculate ground potential uplift in electro facilities based on switch-off times and earth currents. All calculations are made in accordance with requirements for documentation in regulations and standards. We carry out earthing plate measurements of transition resistance and main earthing connections in the facility are checked and measured. Such values can be organised in tables or lists, which then may be transferred to the business' QA system.
At Trainor, we focus on making documentation traceable, so that later checks can be compared with previous reference points and values. Traceable documentation gives increased quality and large cost savings for your company.
Technical Manager - Trainor Kontroll og Måling AS
|Phone:||+47 481 28 766|